Seventh Two-day Meeting on
Propulsion Simulations Using OpenFOAM® Technology
9 - 10 November 2026, Department of Energy, Politecnico di Milano
The seventh edition of the "Two-Day Meeting on Propulsion Simulations using OpenFOAM Technology" will be held at the Department of Energy of
Politecnico di Milano on 9 and 10 November 2026, at the EN:lab building (BL31), Sala Consiglio, Via Lambruschini 6, Milano.
The meeting is co-organized by:
- Internal Combustion Engine Group (ICEG), Politecnico di Milano
- Simulation of reactive Thermo-Fluid Systems (STFS), Technical University of Darmstadt.
The meeting is sponsored by Sursum-Mi, spin-off of Politecnico di Milano.
OpenFOAM is now a consolidated platform for computational fluid dynamics whose capabilities are continuously extended thanks to its object-oriented structure, making it a very efficient platform for the development of advanced numerical and physical models.
This Two-Day Meeting is dedicated to researchers and engineers interested in the use of the OpenFOAM technology for the simulation of propulsion systems. In continuity with previous editions, the event focuses primarily on internal combustion engines, with particular attention to alternative and sustainable fuels, alongside a dedicated session on fuel cells and battery electric vehicles.
Over 30 presentations by academic and industrial speakers are organized in ten thematic sessions. Each session ends with a thematic discussion, and the program includes a panel discussion and an open discussion on OpenFOAM, industry and AI.
» Download the programme & participant booklet
» Event page on the Department of Energy website
Final Program
First Day - Monday 9 November
- 8.30 - 9.00: Registration
- 9.00 - 9.15: Welcome and greetings
- S1 - Spray and Combustion (part 1) - Chair: Gabriela Bracho (CMT - UPV)
9.15 - 9.30: OpenFOAM and LibICE methodology application to large 2-stroke marine engines
Ludovico Viglione (Wärtsilä Services Switzerland)
9.30 - 9.45: Development of a CFD-based virtual extension of an optical spray combustion chamber for advanced spray research using OpenFOAM
Jan Alopaeus (Wärtsilä Finland)
9.45 - 10.00: Numerical aspects of Euler-Lagrange modelling of evaporating alcohol droplets
Viktoria Huschka (TU Darmstadt)
10.00 - 10.15: A Conjugate Heat Transfer Methodology for the Thermal Assessment of Two-Stroke Marine Engines in Methanol Dual-Fuel Operation
Giovanni Gaetano Gianetti (Politecnico di Milano)
10.15 - 10.30: Towards advanced simulations of under-expanded multiphase jets in propulsion systems: low-dissipation numerics and real-fluid thermodynamics
Francesco Duronio (Università dell'Aquila)
- 10.50 - 11.25: Coffee Break
- S2 - Hydrogen and Alternative Fuels (part 1) - Chair: Ivan Cozza (Dumarey)
11.25 - 11.40: OpenFOAM implementation of a novel flame kernel expansion model for lean hydrogen combustion
Enrico Dotteschini (Università di Udine)
11.40 - 11.55: Parametric study of double-pulse diesel pilot injection strategies in a retrofitted marine diesel-H2 dual-fuel engine
Gontzal Lopez Ruiz (University of the Basque Country, UPV/EHU)
11.55 - 12.10: Modelling of a spark-ignition engine fuelled by ammonia using FGM
Frank Schenkel (TU Eindhoven)
12.10 - 12.25: OpenFOAM-based investigation of underexpanded hydrogen jets: effects of pressure ratio and ambient gas on jet penetration and mixing
Jamshid Moradi (University of Oulu)
12.25 - 12.40: Turbulent H2 combustion modelling - presentation of the latest model developments
Vinzenz Schuh (TU Darmstadt)
- 13.00 - 14.20: Lunch
- S3 - Methodologies to handle moving complex geometries - Chair: Giovanni Gianetti (Politecnico di Milano)
14.20 - 14.35: Multi-region ICE simulations in OpenFOAM
Sakari Leponiemi (Wärtsilä Finland)
14.35 - 14.50: A domain-splitting framework for automatic multi-mesh, multi-solver full-cycle engine simulations in OpenFOAM/LibICE
Lorenzo Sforza (Politecnico di Milano)
14.50 - 15.05: LEC LEAP - an automated, up-to-date engine and general CFD workflow
Clemens Gößnitzer (LEC GmbH)
15.05 - 15.20: Propeller modelling approaches in self-propulsion of ships
Hrvoje Jasak (University of Cambridge)
- S4 - Panel discussion: OpenFOAM for propulsion: innovation vs industrial application
15.35 - 16.35: Chair: Gianluca D'Errico (Politecnico di Milano)
Panellists: Carlo Beatrice (CNR-STEMS), Gilles Hardy (Accelleron), Hrvoje Jasak (University of Cambridge / Wikki), Ludovico Viglione (Wärtsilä Services Switzerland), Clemens Gößnitzer (LEC GmbH), Ricardo Novella Rosa (CMT - UPV)
- 16.35 - 17.10: Coffee Break
- S5 - Advanced Engine Concepts - Chair: Roberto Lange (TU Darmstadt)
17.10 - 17.25: The OpenFOAM technology for multi-cycle partially premixed SI engines
Mahmoud Gadalla (Wärtsilä Finland)
17.25 - 17.40: Multi-cycle simulations in Wankel engines: computational methodology and experimental validation
Federico Ramognino (Politecnico di Milano)
17.40 - 17.55: Assessment of operating conditions and combustion performance in an oxy-fuel compression ignition engine using OpenFOAM: towards NOx-free and carbon-capture-enabled technologies
Gabriela Bracho (CMT - Universitat Politècnica de València)
17.55 - 18.10: An open-source 3D-CFD methodology for scavenging-combustion analysis of a hydrogen-fuelled opposed-piston two-stroke engine
Giulio Callegaro (Università di Modena e Reggio Emilia)
- 20.00: Social dinner (registration required)
Second Day - Tuesday 10 November
- S6 - Hydrogen and Alternative Fuels (part 2) - Chair: Mahmoud Gadalla (Wärtsilä)
9.00 - 9.15: Implementation and validation of an AUSM-based multispecies solver for hydrogen injection in OpenFOAM
Carmelo Baronetto (Politecnico di Torino)
9.15 - 9.30: In-cylinder mixture formation and combustion in H2-DI engines: a multi-cycle CFD study for different injection strategies
Marcolucio Capecci (Politecnico di Milano)
9.30 - 9.45: From spray dynamics to engine combustion: a CFD numerical study of ammonia-fuelled compression ignition engines
Daniel Pinilla-Fernández (CMT - Universitat Politècnica de València)
- S7 - Exhaust aftertreatment and 1D-3D modelling - Chair: Augusto Della Torre (Politecnico di Milano)
10.00 - 10.15: 1D-3D coupled simulation for engine simulation: wave action, spray targeting and injection timing
Gianluca Montenegro (Politecnico di Milano)
10.15 - 10.30: A CHT-CFD framework coupling spray, wall-film formation and porous-media interactions: application to a heavy-duty Diesel SCR system with an innovative wire-mesh mixer
Mattia Pelosin (Politecnico di Milano)
10.30 - 10.45: Towards predictive LES of urea deposit formation in a generic SCR channel
Roberto Lange (TU Darmstadt)
- 11.00 - 11.35: Coffee Break
- S8 - Spray and Combustion (part 2) - Chair: Gilles Hardy (Accelleron)
11.35 - 11.50: Spray combustion LES modelling framework in OpenFOAM: application of an injection model from VOF simulations coupled with finite-rate chemistry
José Manuel Pastor (CMT - Universitat Politècnica de València)
11.50 - 12.05: Lagrangian wall film model for spray-wall interaction in high-performance naturally aspirated SI engines
Tommaso Lucchini (Politecnico di Milano)
12.05 - 12.20: A compressible geometric volume-of-fluid framework for high-fidelity simulation of diesel injection
Po-Han Chen (KAUST)
12.20 - 12.35: OpenFOAM-based modelling of in-cylinder combustion and gaseous-fuel mixture formation
Abdul Rehman (University of Oulu)
- 12.50 - 14.10: Lunch
- S9 - Open discussion: Innovating propulsion: OpenFOAM meets AI
14.10 - 14.55: Chairs: Augusto Della Torre, Federico Ramognino (Politecnico di Milano)
- S10 - Fuel cells, BEV powertrain modelling - Chair: Sergio Tosi (Sinergy Flow)
14.55 - 15.10: A CFD methodology for the design and optimisation of PEM fuel cell flow fields for propulsion applications
Margherita Bulgarini (Politecnico di Milano)
15.10 - 15.25: Modeling droplet transport and surface adhesion in fuel cell flow channels
Christian Antetomaso (CNR-STEMS)
15.25 - 15.40: A comprehensive CFD-driven approach to thermal modelling of batteries and electric motors and their cooling system optimisation
Muhammad Hasnain Tariq (Politecnico di Milano)
Side events
Sunday 8 November, 19.00 - Welcome aperitivo
Informal get-together the evening before the meeting (registration required, option in the registration form). Deus Cafe Isola, Via Genova Thaon di Revel 3, Milano.
Monday 9 November, 20.00 - Social dinner
With speakers and participants (registration required, option in the registration form). Assaje, Via Traù 2, Milano.
Wednesday 11 November, 9.30 - 13.00 - Demo session: our in-house tools
Demonstrations of GASDYN (1D) and Lib-ICE (3D CFD on OpenFOAM) with their GUIs: Demo 1 (9.30 - 11.00), from simple engines to full-system integration, co-simulations and advanced combustion modelling;
Demo 2 (11.30 - 13.00), GUI-assisted mesh generation and case setup for full-cycle, direct-injection engine simulations.
Free, in person and online, with a dedicated registration form. Sala Consiglio, building BL25 (Department of Energy), Via Lambruschini 4, Milano.
Registration
Registration is mandatory for every attendee, including co-authors attending in person. Registration fee: 200 € per participant (presenters included); coffee breaks and light lunch are included.
Registration deadline: 1 November 2026. For registration, please use this online form.
Contacts: twodaymeeting-deng@polimi.it - Giovanni Gianetti (giovannigaetano.gianetti@polimi.it)